100 HAND PUMP

The idea behind the hand pump is to be as compact as possible so that you can carry it absolutely anywhere with you.

For that reason, it doesn't have a pressure gauge. All the same, if you get a puncture and pump your tyre back up, there are still things you can do to check whether it's inflated enough:

Mountain bikes

- press the tyre with your thumb. If you end up touching the rim, your tyre isn't pumped up enough. There should be resistance when you press, but you should still be able to push your thumb into the tyre a little bit.
- when you're riding, look to see whether the rims are touching the ground and whether the tyre seems underinflated.

Hybrid and city bikes

- press the tyre with your thumb. If you end up touching the rim, your tyre isn't pumped up enough. There should be resistance when you press, and you should struggle to push your thumb into the tyre.
- when you're riding, look to see whether the rims are touching the ground and whether the tyre seems underinflated.

It's essential to check your tyre pressure using a pump that has a pressure gauge, and to add or remove air so that your tyres are at the recommended pressure for the type of cycling you're doing.

There are different ways of checking depending on how often you ride:

If you ride every day (3-7 days per week).

- at the start of the week, inflate your tyres to the recommended pressure using a pump that has a pressure gauge.
- squeeze the tyre between your finger and thumb before each ride to make sure it hasn't deflated.

If you only ride occasionally (once per week).

- pump up your tyres before each ride because they will have lost pressure since you last went out on them.

There could be several reasons for this:

- for screw-on hoses: you haven't screwed the pump onto the valve tightly enough
- you haven't unscrewed the valve enough (not relevant for Schrader).
- the pump is not perpendicular to the valve

- Make sure you're using the right hose for your valve.
- Check that your valve is either Presta or Schrader.
- Push the hose as you screw it on.

- Check that the pump is correctly screwed onto the valve
- To make your pumping more efficient, position the valve perpendicular to the floor (top or bottom) so that your hose is straight

This pump is designed to be used when you're out riding and get a puncture. It enables you to put air into your new inner tube. It doesn't have a pressure gauge, so it's hard to know the exact pressure.
We recommend that you also get yourself a floor pump with a pressure gauge.

Don't panic! You can get yourself a new hose from one of our stores.