20" Riverside 100 and 120 hybrid bike

There are two barrel adjusters on each brake, situated on the brake levers. They are used to adjust the tension of the brake cable. Make sure you get the setting right when using the barrel adjuster. (The more the barrel is tightened, the tighter the cable).

The brake cable noodle is a stainless steel part that is used to guide the brake cable into the V-brake caliper. The noodle is set at a specific angle to ensure the cable can slip into position and offer effective braking. It can be replaced if damaged.

A V-brake is comprised of two callipers (one left calliper and one right). They are linked together in the middle, at the brake cable sleeve. 

Pull the brake cable housing out to release the callipers. This will allow you to remove the wheel easily.

The handlebar is welded to the stem. This is screwed to the top of the bike thanks to a single screw bolt. Use a torque wrench to tighten the screw to a minimum torque of 22 Nm.

You can test the brakes on your child's hybrid bike by taking it by the handlebars and walking with it, pulling the right lever to test the rear brake and the left to test the front. The wheels should stop moving when the respective lever is pulled. The brake pads should not rub against the sides of the rim when the brakes are not engaged.

 

Here's what to do if you notice that the braking isn't smooth or the wheels rub against the brakes: There is a barrel adjuster in front of the brake lever. Turn the barrel in a clockwise direction to tighten the brake for sharper braking. Turn the barrel in an anti-clockwise direction to loosen the brake for less sharp braking and to move the brake pads away from the rim. 

 

It's important to check your brakes regularly.

To properly tighten the "quick release", follow Thomas' advice by watching our video tutorial.

The recommended pressure is always indicated on the tyre sidewall. We recommend inflating your tyres to the pressure indicated on each tyre. This may vary from tyre to tyre. 

Check that the bike's tyres have enough air in them by simply placing your child in the saddle while the bike is stopped. If the tyre pressure is correct the tyre should go down ever so slightly with your child's weight. 

 

This stand allows the child to easily stabilise their bike. It is designed for 16", 20", and 24" bikes (kids' bikes and folding bikes).

Great for carrying small items like your kids and snack!

This black metal basket is easy to clip onto the bike handlebar. It is compatible with 20", 24", 26" and 28" bikes that have a 22 mm handlebar.

We designed this bottle cage with a side opening to make it easier for children to remove a bottle from it. It can be mounted onto the bike frame and holds a 380 ml bottle.

380 ml bottle: So your child won't forget to stay hydrated while riding their bike!
Available in 3 colours: red, black, or blue.

You can use an "all-in-one" type product (available at Decathlon stores) to unjam, clean, lubricate and protect your child's bike. It's a very handy product!

To lubricate the chain on your child's hybrid bike, turn the pedal and "spray" onto the full length of the chain as it passes. 

Then leave it to dry for a few minutes. If the chain is very dirty, clean it with a brush or a cloth and spray it again with "all-in-one" product.



Our advice: Avoid any contact with the brake pads and the braking area on the wheel rims.



 Protect your bike: Apply all-in-one regularly to prevent rust from appearing.

If you notice that your child's bike is dirty after a few rides (mud, rain, dust, etc.), it's a good idea to take a few minutes to get it clean again.


If it's covered in dust, simply use a dry cloth to clean it. If there's mud or other dirt that's harder to get rid of, you can clean it with a bucket of hot water and a sponge (or a wet cloth) and use some soap or bike shampoo. You can also wash dirty parts of the bike (frame, fork, handlebars, wheels).

DID YOU KNOW?  We strongly recommend against using a pressure washer to wash your kids' bike. It may damage certain components (headset, bottom bracket) which could put your child at risk. 

When you've finished, simply wipe it dry with a cloth to prevent rust.
It's a good idea to apply fresh lubricant to the moving parts of the bike (chain, headset, bottom bracket)

V-Brake pads are available as spare parts.

To change them, simply follow the steps in the video. 

To change the LED batteries on the Riverside kids' bike, follow the steps shown in our video!

You should always check the tyres before you take your bike out. 

If they're flat, check to see if they have a puncture. To do this, inflate them as much as they will go.

If they go flat quickly, you will have to take the wheel off and then the tyre, and change or repair the inner tube. 

If they go flat slowly, check the surface of the tyre for the presence of sharp objects or bits of glass. You will then need to take the wheel off and then the tyre, and change or repair the inner tube. Take care when removing the sharp object or shard of glass causing the puncture. 

 

If it is not flat, we recommend checking the pressure of the tyres (see section above). 

 

DID YOU KNOW? The useful life of rubber depends on how it is used and stored. If you can see cracks in the tyres, we advise you to replace them with new ones. 

How to change the handlebar grips on the bike Yacine, our bike expert, tells you what to do in this video.

We recommend you keep your bike in a dry place.  You should check that it doesn't get damp.

The lifespan of your child's bike depends on how it is used, maintained and stored.

The more damp and saline the conditions, the more the child's bike will be prone to corrosion and the shorter its useful life.  

So it's important to keep it stored clean and dry in a place that is not damp. 

 

DID YOU KNOW? You shouldn't hang up bikes with telescopic forks by the front wheel. Hang them up by the rear wheel. This will ensure your fork lasts longer. 

If you suffer a puncture, stop immediately in a safe place to prevent the rim from being damaged. 

Turn the bike upside down and set it down on the ground on the saddle and handlebars.

Release the brakes to allow the wheel to come out. Squeeze the V-brake callipers together and release the noodle. 

For the front wheel, remove the wheel from the fork and replace the inner tube (see explanatory video). 

For the rear wheel, position the derailleur on the smallest cog. Loosen the wheel and then change the inner tube (see explanatory video). 

 

As a last resort, you can always use puncture repair spray, with which you can repair an inner tube without tools, though this won't work if the inner tube is torn.

Need to adjust the derailleur on your child's bike so you can enjoy a ride together without hindrances? Simply follow Yacine, who will be your guide today on how to adjust your bike correctly. Following these tips may spare you from having to do roadside repairs not to mention getting your hands all dirty from the grease on your chain. For proper adjustments you will need a 9 mm wrench and a 4 mm Allen key.

0:53 Replace the chain and remove the chain guard
1:16 Disconnect the derailleur cable
1:37 Loosen the cable tension
1:58 Adjust the stop screws for the large and small cogs
2:40 Adjust the stopper on the small cog
3:14 Use the shifter to move the derailleur and adjust the stop on the largest cogs.
3:48 Adjust the cable tension so you can shift properly
4:15 If the chain rubs against the derailleur, tighten the cable.