The Complete 500 JR model has a high-quality, FSC-certified 100% Canadian maple deck that has a long-lasting pop. Wide and moderately raised nose and tail. Medium concave. Ideal for skating on streets and curves. 50mm, top-range wheels.
We created this model so that kids aged 8 to 12 can start out skateboarding with a technical board adapted to their height.
To adjust how a truck turns, you need to find your skateboard's kingpin. Tightening the kingpin with a T-tool will make your skateboard more rigid. On the other hand, loosening it will make it more manoeuvrable.
But be careful not to overtighten the hanger as this could damage the surrounding bands.
If you loosen the kingpin too much, you may experience wheel bite. This is when the wheel touches the board while turning, causing it to instantly lock up.
As with the trucks, use your T-tool to loosen the nut around the axle (at the end of the truck axle) to free the wheel from its nut. Be careful to only loosen it slightly so that the wheel can turn without coming off the truck.
A skateboard deck has a limited lifespan. Natural wear and tear will cause the board to soften and deteriorate with time and repeated impacts. If your board is too worn, we recommend replacing it. To do this, just remove the trucks from your worn board and put them on your new board (with a new grip).
When you skate frequently, it's normal for the board to wear out quickly.
As a reference, if you skate 4 hours per week, we recommend replacing your board about every 3 months.
The wood we use is FSC-certified (Forest Stewardship Council). This certification guarantees the forest is managed in a way that preserves the biological diversity and benefits the lives of local populations and workers, all while ensuring its economic viability.
In addition, we use a high-performance water-based glue that is much more environmentally-friendly than epoxy resins.
All our boards are lab-tested. These tests enable us to validate the European standards related to skateboard usage and test the board for wear. These lab tests are complemented by field tests, some measured and others based on tester evaluations, who then put the product to the test.
The result: a tried and tested product.
COMPLETE 100 JR - trucks
replacing skateboard truck
Hugo, our product engineer, demonstrates how to replace skateboard or longboard wheels.
COMPLETE 100 JR REPLACING WHEELS
Hugo, our product engineer, demonstrates how to replace skateboard or longboard bearings.
COMPLETE 100 JR BEARINGS
Hugo, our product engineer, demonstrates how to replace skateboard or longboard bushings.
COMPLETE 100 - BUSHINGS
Hugo, our product engineer, demonstrates how to replace the pivot cup in a skateboard or longboard.
COMPLETE 100 - pivot cup