Domyos EB 120

Your bike runs on batteries, so check the correct placement of the battery terminals (+/-).

If the problem persists, start again with new batteries.

Check that it is correctly plugged in:

- behind the console,

- where the stem meets the structure.

Check that the switch behind the console is on "km" to display in kilometres or "mi" to display in miles, and that the other switch is on "EB" for exercise bike.

First, please check that the black block was properly removed during assembly, as shown in the following video:

If the black block was removed, please check the assembly of the resistance cable, as shown in the following video:

Check that the visible screws are tight enough. If the screws are not tight enough, parts could move and make noise. You also may want to check the stability of your bike.

It is possible that the screws on the pedal and crank are not properly threaded or placed.

To solve the problem, loosen the pedals by two turns, then re-tighten them very hard.

1. Tighten all visible screws.

2. Re-tighten the adjustment wheels.

Turn the adjustment ends on the rear foot until the bike is stable.

1. Wipe any perspiration off your product after each workout.

2. Clean with a soft cloth (dampen with water) after each use.

3. Regularly check the stability of your bike as well as the tightness of the screws according to the user guide.

Do not leave in a damp place or outdoors.

For home use only.

Maximum user weight: 110 kg.