Domyos EB 900

The console does not turn on after pedalling for a few moments, you should be able to solve your problem with a few easy checks:

Check the condition of the cables and connections to your device behind the console and under the stem.

This involves checking that:

- the connectors are fully attached,

- the cables are not crushed/stripped or cut,

- the pins on the connectors are properly aligned.

The video below will show you what to do. The bike shown is not a DOMYOS EB 900, but the procedure is the same.

 

If those checks do not solve your problem, check that there is a blue light behind the console above the connector, and make a service request further down on this page.

 

You have a randomly occurring E2 error code or an E3 error code, check the condition of the cables and connections to your device behind the console and under the stem.

This involves checking that:

- the connectors are fully attached,

- the cables are not crushed/stripped or cut,

- the pins on the connectors are properly aligned.

The video below will show you what to do. The bike shown is not a DOMYOS EB 900, but the procedure is the same.

 

If your problem is not solved, please make a service request lower down on this page.

This is a console configuration problem.

If your console is not displaying the right speed: Check that the cursor at the back of the console is positioned to the right type of equipment:

- EB = exercise bike.

- CT = cross trainer.

- RO = rower.

Then push the button to the left of the cursor to reinitialise the console.

 

If your console is not displaying the right unit of measure:

1/ Pedal to turn on the console.

2/ Hold down OK to enter the menu.

3/ With the + or - button, select UNIT and press OK.

4/ Choose the correct unit: km for kilometres/hour or mi for miles/hour by pushing + or -.

5/ Push QUIT to quit the menu.

 

1/ Pedal to turn on the console.

2/ Hold down OK to enter the menu.

3/ With the + or - button, select SND and press OK.

4/ Choose ON to activate the sound or OFF to deactivate it.

5/ Push QUIT to quit the menu.

Check that the visible screws are tight enough. If the screws are not tight enough, parts could move and make noise. You also may want to check the stability of your bike.

It is possible that the screws on the pedal and crank are not properly threaded or placed.

To solve the problem, loosen the pedals by two turns, then re-tighten them very hard.

1. Tighten all visible screws.

2. Re-tighten the adjustment wheels.

Turn the adjustment wheels on the rear foot until the bike is stable.

1. Wipe any perspiration off your product after each workout.

2. Clean with a soft cloth (dampen with water) after each use.

3. Regularly check the stability of your bike as well as the tightness of the screws according to the user guide.

Do not leave in a damp place or outdoors.

For home use only. 

Maximum user weight: 150 kg.