The "pull and turn" wheel is used to put the bike in the storage position, adjust the saddle height and hold the saddle tube in position, without having to unscrew it completely.

To unscrew: When you turn the wheel (1) anticlockwise, the screw thread (2) rotates in the thread and the contact area (3) comes away from the saddle tube. The saddle tube is held in position by the centring pin (4). Simply pull on the wheel (1), and the pin (4) retracts to release the tube.

To tighten: The centring pin (4) is spring-loaded and automatically snaps into place when it is aligned with an adjustment hole. Simply turn the wheel (1) clockwise so that the thread (2)  is screwed into the threaded hole and the contact area (3) is correctly positioned in the saddle tube.

To unfold the Initial bike, turn the saddle (1) to the in-use position by unscrewing the "pull and turn" wheel.Then push the front foot of the bike (2) lightly with your foot. The weight of the bike puts it in the riding position(3).

Click on the button to see the video.

The console switches on automatically as soon as you start pedalling.
Button (1) is tactile, and only appears and functions when the console is powered up.
When switched on, the information scrolls every three seconds; press button (1) to freeze the information.
Press button (1) again to scroll through the information again.

The console goes into pause mode 2 seconds after you stop pedalling and the display starts flashing.
If you resume pedalling, the console exits pause mode.
If you press button (1) for 3 seconds, the console shuts down.
The console switches itself off after 2 minutes of inactivity.

The initial bike folds away to take up little space when not in use.
Turn the saddle into the storage position (1). Pull the handlebars back (2), the bike is supported on the rear foot and the folding foot moves into the storage position (3). To move it, pull back again on the handlebars so that the bike is on the roller feet (4), You can now store or move your bike.

Click on the button to see the video.

Do not leave in a damp place.
Do not store outside.

Maximum user weight: 100kg.
For home use only.

1. After every session you should take time to wipe any sweat from the machine. You should also dust it regularly with a soft cloth.

2. You should make regular checks to ensure that your bike is stable and that the screws and nuts and bolts are sufficiently tight, as per the user guide.

If the console flashes when you pedal, it is not detecting pedalling. Please disconnect and check the connections you have made at the bottom of the stem tube (step 4 of the assembly instructions) and at the back of the console (step 6 of the assembly instructions).

If the problem persists, please submit a support request using the button at the bottom of this page.

Your console doesn't turn on when you pedal.
First, press the button at the back of the console in the bottom centre. The console should light up:
If the console still does not switch on, check the batteries. To do this, remove the cover at the back of the console and check that the batteries are making good contact with their holder. You can also try using new batteries.
The console lights up when you press the button, which means that it is not receiving the information that you are pedalling. You need to check that the speed sensor is connected correctly. Unscrew the screws holding the console in place and ensure that the console is properly connected.

If the console still does not switch on after these checks, please contact Decathlon support.

Check that the visible screws and adjustment wheels are tight enough.
If the screws are not tight enough, parts could move and make noise.
You also may want to check the stability of your bike.

Your bike is fitted with asymmetrical foot caps (1) giving it stability on different types of floor.
To adjust the setting, simply rotate the foot caps (1) to stabilise the bike.
It is advisable to ensure that the "Pull and turn" wheel (2) is properly tightened for optimum stability.

Check that the black spacer has been removed in step 4 of the assembly instructions.

If the problem persists, please submit a support request using the button at the bottom of this page.

It is possible that the screws on the pedal and crank are not properly threaded or placed.

To solve the problem, loosen the pedals by two turns, then re-tighten them very hard.

Is your equipment working properly but you're having a problem with the application? Click the "MY APP" button for troubleshooting tips.

This console has two error codes:
“E00”: The console batteries need changing.Simply remove the cover at the back of the console to change them.
“E01”: The console needs replacing. Please contact Decathlon support.

You can remove the error code display by holding down the console button for 4 seconds.