INTENSE RUN

-

Before you start, make sure your treadmill is plugged in to the mains.

1. Press the "STOP" button,

2. While holding the "STOP" button down, insert the "SAFETY KEY",

3. The bottom right of the display will tell you which unit is being used:     UNIT MI   or  UNIT KM,

4. Press "+" to change the unit,

5. Press "STOP" to confirm the changes,

6. You can now use your treadmill.

 

1. The Bluetooth symbol lights up and indicates that a tablet or smartphone is connected to the console. This only works with the “Domyos E-Connected” app for IOS and Android.

    E-Connected FAQs: https://support.decathlon.fr/support/application-e-connected-tp_1079

2. The USB port is for keeping your tablet or smartphone charged when using your treadmill.

3. The jack socket is for connecting your MP3 player, tablet or smartphone to your console.

To know the total treadmill use, press "STOP" + "-" and insert the safety key.

Press START six times to display the total km/mi.

1. Check that the power cord is plugged into a working mains socket (to check if the wall socket is working, plugin a lamp or other electrical device).

2. Check that the other end of the power cord is connected to your treadmill.

3. Check that the main switch near the power cord is set to I.

4. Check that the safety key is pushed fully home in the console.

1. Shoes:

=> The noise you can hear could be the sound of your shoes on the running belt. To check that the noise isn't coming from your shoes, please see the video below

 

2. The screws are loose:

 => Tighten all of the screws.

 

3. The running belt is wonky:

=> Select the "Centring the running belt" tab in the MAINTENANCE section.

 

4. The running belt is not lubricated:

=> Select the "Lubricating the running belt" tab in the MAINTENANCE section.

When you press a button on the console, a beep notifies you that your action has been taken into account. You can deactivate this beep:

1. Go to the "GO" home screen on the console by pressing the "STOP" button several times.2. Press the "+" button to activate the beep / Press the "-" button to deactivate the beep.3. To exit, wait for 5 seconds until the display returns to GO.

The running belt is slack

=> Select the "Running belt tension" tab in the MAINTENANCE section.

 

1. If your treadmill is plugged in to an extension cable, unplug it and plug it directly into a wall socket.

2. The problem could be caused by the power cord. In this case, please see the FAQ on "THE TREADMILL WILL NOT SWITCH ON"

Slightly dampen your hands and place both hands on the sensors.

 

Every 200 km, the word "service" flashes up on the "GO" home screen. This message reminds you that your equipment is due for servicing.

 

To delete the flashing message:

Press the STOP button several times to go to the console's start-up/home "screen"

Hold down the "STOP" and "^" buttons for a few seconds.

Check that the icon on your treadmill's console is off.

Is your equipment working properly but you're having a problem with the app? Click the "MY APP" button for troubleshooting tips.

It is important to do this regularly (every 200 hours of use) to extend your treadmill's life.  1 & 2. Two sprays to the left and right of the running belt will suffice.  3. After spraying, let your treadmill run without anyone on it for five minutes at 5 kph.

Regular maintenance is necessary to preserve the performance of your appliance and extend its service life. To get rid of any annoying noises coming from your treadmill, remember to:

                       Tighten the screws and bolts once a month.

                       Lubricate the running belt after 200 hours of use.

                       Place a standard floor mat (Domyos Training Mat) under your treadmill.

 

CLEANING AFTER EACH USE:

                      Turn off and unplug your treadmill.

                      Apply a small amount of gentle universal cleaner to a pure cotton cloth. Do not spray the cleaner directly onto the treadmill and do not use ammonia or acid cleaners.

                      Wipe the console and screens.

                      Remove any dust and stains on the ramps, uprights, footrests, frame and motor hood. Remember to also wipe the platform alongside the running belt. Do not clean under the running belt.

You will need the Allen key (BTR) that came with your treadmill:  1. Start your treadmill at a low speed (4km/h).        2. Insert the key into the screw on the side where the running belt is off-centre.        3. Turn it a quarter turn clockwise (wait 30 seconds between each quarter turn) until the belt is back in the correct position.

 

The running belt is a wearing part that becomes loose over time. Re-tighten it as soon it begins to go slack (sliding sensation, jerky motion).

 

1&2. Turn the two adjustment screws a half turn clockwise (repeat if necessary, but make sure you don't over-tighten the belt).

 

3. The belt is properly tightened if you can lift the edges 2 to 3 cm on each side.