REF: 8561144, 8588380, 8561149, 8561145, 8588385
We firmly believe that the life cycle of a product does not end when it gets damaged. This is why we offer solutions for properly using, maintaining and repairing your product, in order to extend its lifespan.
Whether you have an AIR BASIC or AIR COMFORT inflatable mattress for spending some great nights out on a camping trip, we're here to answer your questions or help you if you have a problem.
This page will be useful if you have one of the following two models:
Air basic mattress 70/120/140cm
Air comfort mattress 70/120/140cm
It is really important to inflate your mattress to a good pressure.
Do not over-inflate in order to reduce wear and tear and avoid damaging your back, but inflate the mattress enough so that it is comfortable and allows you to sleep properly.
The ideal inflation of this type of mattress is a moderate inflation (0.02 BAR or 0.3 PSI) at which your bottom can feel the ground when you are seated on the mattress. When you are lying on the mattress, it conforms to the shape of the whole body, making you feel very comfortable.
All the Decathlon camping pumps (foot, hand, electric) can be used to inflate this mattress.
How to inflate your inflatable camping mattress
Just open the cap of the mattress so that it gradually deflates on its own. To speed up the process, stand at the opposite end to the cap and press down on the mattress so the air comes out faster.
You can now start by folding it widthwise with 2, 3 or 4 folds depending on the size of the mattress. Then roll it up lengthwise so that it can be stored in its bag. Remember to close the cap.
As mentioned previously, the pressure of the mattress is the key to a good night's sleep. When seated, you should be able to feel the ground. When you are lying down, the air will spread evenly under your whole body.
There is no preferred way to sleep: you can sleep with your head at the valve end or at the other end; Lie down as you see fit!
For maximum comfort, get a sleeping bag with the correct temperature rating, as well as a pillow.
When you sleep, the sound of the friction between the mattress and the ground can be annoying.
Do not over-inflate in order to minimise this problem.
You can also put a blanket or a sheet under the mattress.
If you want to improve the thermal insulation of your mattress and get better protection from the cold and moisture of the ground, you can put a foam mattress or a survival blanket under your mattress, or a groundsheet under your tent.
Here are all the tips you need to maintain your mattress in the best possible way.The key to properly maintaining your mattress are the washing, folding and storage steps. You will find more information by clicking on the link at the bottom of the section.
Wash
With soap or washing-up liquid, gently rub the surface of your mattress to remove any dirt.
Do not dry your mattress in the sun but use a cloth instead.
Fold up
Follow all of our advice for folding your mattress in the previous section.
Storage
Mattresses are sensitive to heat and humidity. So, store them in a dry place at amoderate temperature.
If possible, lay them flat with the valve open.
HOW TO REPAIR A HOLE IN YOUR INFLATABLE MATTRESS
Your mattress appears to have a hole in it and you are probably wondering where the leak is coming from. Indeed, it is difficult to spot a hole in the mattress with the naked eye. Put some soapy water on the surface of the inflated mattress beforehand and wait for air bubbles to form showing you the correct location of the leak.
The leak is on the surface of the mattress
You can repair your mattress with a patch. A kit is supplied with all our camping mattresses but if you have run out, click the link below.
The leak is at a weld
You can apply a special glue to perform this repair, taking care to read the instructions for use.
PUTTING A PATCH ON YOUR INFLATABLE MATTRESS
Once the location of the leak has been identified, all you have to do is apply a patch to repair your mattress. The video below explains the entire process on how to perform this repair.
On a velvet covering (left part of the video), use the scraper provided in the kit and gently rub the surface so that the patch sticks to the material. Hold it in place for one minute.
On a plastic coating (right part of the video), apply the patch directly to the surface and hold it in place for one minute.
How to repair a hole in your inflatable mattress
I HAVE ANOTHER PROBLEM WITH MY MATTRESS
The valve is faulty
The mattress cap may be screwed on incorrectly, so that it is letting air out. So make sure that it is properly closed. If the valve is really faulty, you can easily replace it.
The transport bag has a hole in it
Is your transport bag faulty and no longer working properly? Check out our solution to the problem!
Pack of 3 large air mattress self-adhesive patches
Seam grip glue for fabric repairs
Replacement valve for an inflatable mattress
Camping mattress transport bag