MT900 ULTRALIGHT TREKKING BACKPACK

The correct adjustment of your backpack is really important in order to walk in the best possible conditions and not to damage your back.

The steps:
1/ Loosen all straps and adjust the back according to the different markers proposed 
2/ Put on the bag
3/ Put on the belt and tighten it
4/ Tighten the shoulder straps
5/ Adjust the load restraints and the chest strap

Load restraints are straps placed at the top of each shoulder strap of your backpack.
Because of the adjustable back height of your bag (thanks to the shoulder straps), it is necessary to adjust the position of the shoulder strap in relation to the bag to limit swinging. This function is provided by these straps.

To adjust them, once the bag is on your back, the belt is buckled and the shoulder strap tension is adjusted, simply grab the strap of each restraint over your shoulders and pull them forward until you feel the bag return to your back.
To control its stability, you can shrug your shoulders a few times and take up tension if necessary.

You will be carrying your backpack for several days. It is therefore important to organise the loading of the vehicle in such a way as to find a balance between front and back and left and right. This is because your body may tire more quickly if the distribution of your bag is unbalanced.

So, below are our tips on which parts of your equipment should be placed at the bottom, middle and top of your backpack.

The MT900 UL has been designed for a fast trekking programme while carrying little weight.
To take full advantage of its ventilated back and ultra-light components, we recommend that you do not exceed a load of 12kg.

The UL concept is a choice of backpack design focused on maximum weight savings. By limiting the use of zips and small pockets in favour of large open volumes and the use of low density polyamide fabric, the MT900 UL backpack approaches the one kilogram mark in the 50L version (1.1kg without the topper and rain cover).

At FORCLAZ, as with most manufacturers, our backpacks use water-repellent but not waterproof components. Indeed, designing a 100% waterproof bag requires the sealing of every seam line as well as the use of specific and very expensive zips. That's why all our bags are equipped with a protective cover to put over your bag in case of rain.

To each their own style! There are many ways to protect your belongings while trekking, each with its advantages and disadvantages.

Poncho cape:
In terms of external protection for the bag, the poncho is undoubtedly the most effective solution as it allows the user and the bag to be completely covered, without the risk of leakage at the back. The main problem is the lack of mobility and convenience when it comes to putting your bag down or accessing it.

Rain cover:
Lightweight and quick to install, the rain cover is an outdoor protection. It fits on your backpack in seconds when its housing is accessible from the outside (which is the case with our latest bags like the MT500 AIR). In a group, everyone can help their neighbour to put it on without anyone having to put their bag down.
When coloured, they are a practical visibility feature in fog or at night.
The disadvantage of rain covers is that they do not protect the shoulders. In the event of heavy rain, it is not uncommon for water to seep through the back of the bag and it is therefore necessary to protect your most sensitive items in small waterproof bags.
On the other hand, rain covers are prone to tearing.

Reinforced rain cover:
Like the classic version, this cover protects against rain and has two sides: a classic visible side (orange) and a reinforced dark side to better resist cuts and holes that can be caused by branches. However, they are heavier.

Water-repellent storage cases:
Available in a variety of sizes, the waterproof storage covers allow you to better store your belongings in your bag and protect them from moisture. The only problem is remembering what you put in it or you might have to look for your stuff. Please note that these covers are not completely waterproof. They are therefore not suitable for long exposure to water (do not use outside the bag).

Waterproof storage cases:
More resistant and above all 100% waterproof, these covers are ideal for protecting very sensitive equipment or for protecting items outside the bag. Unfortunately their plastic structure makes them stiffer and heavier.

Decathlon backpacks are designed to be strong and durable and undergo extensive testing (components, seams and finished product) to ensure that they serve you for as long as possible.
We offer a 10-year guarantee on all our backpacks from the date on the receipt.

Need to repair your backpack? View the technical diagram by clicking here.

View the technical diagram and find spare parts by clicking here.