ASSEMBLY
Unfolding
Unfold each component of the court on a flat surface.
Inflate each component to a pressure of 7 PSI (0.48 bar) using the pump, then assemble them following the instructions.
REF: 8647133
MODULAR INFLATABLE WATER POLO COURT 20 M X 10 M
2022
Designed for intermediate players or water polo teams looking for a court that will let them play in any water. Our court also fits into a suitcase. It'll also be perfect for any association or groups wanting to set boundaries for swimming areas.
The court includes:
- 2 x 2.5 M * 0.8 M goals - 4 rectangular side zones including 2 bench areas - 2 side lines with markings for 2 metres in red, 5 metres in yellow and the mid line in black: Each line is divided into 3 sections, measuring 7.5 m, 5 m and 7.5 m respectively.
- 8 weighted bags.
Unfolded dimensions:
21.5 M x 10 M or 16.5 M x 10 M Dimensions usable in play:
20 M x 10 M or 15 M x 10 M Dimensions folded (suitcase):
L 95 cm * W 53 cm * H 42 cm Tube diameter:
12 cm Weight: 44 kg
Attachment
The court can be attached to either the edges of the pool using ropes, or by ballasting with the 8 weighted bags and 8 x 5-metre ropes provided.
The water polo court is attached either with ropes or with an innovative weighting system.
To ensure effective ballasting, fill the bags with sand or stones up to the limit to get an approximate weight of 15 kg. Each bag is then inflated to swim to the court. This allows for easier set-up around the court. When the weights are in place, deflate them to let them sink to the bottom.
DISMANTLING
Separate the weighted bags from the court, then dismantle the components.
Move each component onto a flat service, fully unscrew the upper cap of the valve and then partially unscrew the base of the valve, letting air out for approximately 1 minute.
CAUTION: If you unscrew the base of the valve too quickly, you'll hear an extremely loud noise.
MAINTENANCE
Rinse the product in clean water after each use to eliminate any dirt.
Dry it before storing it away in its case or any enclosed space.
REPAIRS
Our water polo court has been designed to be able to be repaired by the customer. If you notice a leak in a component, you simply need to open the 2 zips and remove the bladder to locate the part with the hole.
We provide a repair kit including adhesive patches, several replacement "boston" valves and a 23-metre rope to pull each bladder out of its cover. An instruction video explains to the user how to extract the "bladders" from the protective covers themselves.
REPAIRING A PIERCED BLADDER WITH AN INTEGRATED ADHESIVE PATCH - WATER POLO INFLATABLE GOAL WATGOAL 550
REPAIRING A PIERCED BLADDER WITH AN INTEGRATED ADHESIVE PATCH - WATER POLO INFLATABLE GOAL WATGOAL 550
CHANGING BLADDERS (PARTS STOCKED AT HENDAYE) COURT SIDE ZONE - WATER POLO INFLATABLE GOAL WATGOAL 550
CHANGING BLADDERS (PARTS STOCKED AT HENDAYE) GOAL SIDE ZONE - WATER POLO INFLATABLE GOAL WATGOAL 550
CHANGING BLADDERS (PARTS STOCKED AT HENDAYE) - WATER POLO INFLATABLE GOAL WATGOAL 550
PARTS
Need a replacement part for your court? Contact us at the following address: [email protected]
OUR PLEDGES
Because you're looking after your health, we're looking after your products. Thanks to our support site, we're making the maintenance and repair of your DECATHLON products and equipment more accessible. Find the assembly and start-up instructions and tutorial videos for maintaining and repairing your products, FAQs, available spare parts and the services offered by the technicians in your DECATHLON Workshops, so that we can continue helping and supporting you!