MT 420

Do not use the trampoline during poor weather conditions as this could invalidate the warranty (wind, snow).

 

1. The tubes don't fit together:

=> Assembly must be finished in order for the entire frame to be completed.

 

2. You cannot finish the assembly:

=> Click "request assistance".

 

3. One of the frame tubes is bent:

=>All spare parts can be ordered via our website or from your local Decathlon store.

1. Fasten the zip on your net.

2. Position your net on the jumping surface so that the zip fastening is centred between two poles.

3. Take the cord on the opposite side by its rigid red tip and tie a knot at the triangle underneath the zip fastening (centred between two poles).

4. Thread the cord into the net's hole and then directly into the metal triangle at the spring.   

1. Assembly problem:

=> Refer to the assembly video above.

 

2. You cannot finish the assembly:

=> Click on "request assistance".

1. Assembly problem:

=> Refer to the assembly video above.

 

2. Don't hesitate to force the screws:

=>The screws are self-drilling screws that must slightly drill into the metal for a better hold.

1. Fasten the zip on your net.

2. Position your net on the jumping surface so that the zip fastening is centred between two poles.

3. Take the cord on the opposite side by its rigid red tip and tie a knot at the triangle underneath the zip fastening (centred between two poles).

4. Thread the cord into the net's hole and then directly into the metal triangle at the spring. 

If repetitive jumping and UV rays have damaged your DOMYOS ESSENTIAL trampoline, rest assured that you can restore it to its original condition. All spare parts are available on our website.

In winter, protect your trampoline from bad weather and ideally store it indoors. Remember to remove your trampoline's net and feet as soon as strong winds are forecast in your area.

 

                                                                                                            

Clean the protective foam with clean water and mild soap. Do not use abrasive products or high pressure water.