ONDAILY 700

To go back to clock mode, disconnect the watch by pressing and holding any button for 2 seconds.

Strava is only compatible with the watch on the iOS version (iPhone).
Close the Runkeeper and Decathlon Coach applications if they are already open.
Open the Strava application
Activate the connection in the Strava application: More> Settings> External devices> Activate"Echo,Timex, RFLKT"
Press and hold any button on the watch for 2 seconds
Press the watch connection button on the top right
Confirm the connection with Strava on the watch
The watch will connect to the phone.

1/ Make sure that your phone is compatible
2/ Close the Decathlon Coach, Strava and Runkeeper applications if they are already open
3/ Restart the Decathlon Coach application

If it still does not work, it could be because your battery needs replacing.

Close the Strava and Decathlon Coach applications if they are already open.
Open the Runkeeper application
Activate the connection in the Runkeeper application: Settings> Manage connections in the Runkeeper application: Apps, Services, Devices> Manage devices: Devices and settings
The Runkeeper application is now in search mode
Press and hold any button on the watch for 2 seconds
Press the watch connection button on the top right
Confirm the connection with Runkeeper on the watch
The watch will connect to the phone.

Find out how to change the settings on your watch:video

Yes, the information measured by the accelerometer in running mode is not as accurate as that given by the phone's GPS and depends on external criteria such as the slope and the surface (soft ground, hard ground, etc.).

The watch incorporates physiological expenditure into its calorie calculation and this starts at midnight, integrating sleep time automatically even if the watch is not worn.
It is therefore normal that when you wake up, you have already burned some calories.

The watch automatically measures walking and running activities using an accelerometer.
It detects the type of movement linked to walking and running and will only measure these two sports.
To ensure measurements are as accurate as possible, you must have a normal stride, i.e. with your arms swinging by your sides. Other movements are not counted (for example: watch not worn on the wrist, etc.).
It is normal for steps not to be counted when you are looking at your watch with your wrist facing you.Accuracy depends on the type of ground and the gradient.
For better accuracy on an activity, pair your watch with your smartphone.

Daily activity data is automatically synced as soon as it connects with the Decathlon Coach application.video

Activate connection mode
With the watch in search mode, press one of the 2 buttons at the bottom.
The watch asks you if you want to forget the pairing with your old phone, confirm by pressing the button at the bottom right.
The watch will reset to first pairing mode.
You must then follow the first installation procedure again

Yes, we wanted users to be able to measure their progress in relation to their goal (e.g. 10,000 steps) by combining daily activity and running into a single activity (Walking activity)
Users will also see specific details of sports activities done in mirror mode in another activity.

You can reset your watch as follows:
1/ Activate connection mode.
2/ With the watch in search mode, press all 4 buttons at once.

If you are unable to carry out this operation, remove the battery and replace it after a few minutes.

If your product cannot be repaired, return it to a WEEE collection point or any DECATHLON store to optimize recycling.