ONstep 100

REF: 8228295

ONSTEP 100

2013

First use

How do i set my stride length?

There are 2 ways of setting your stride length on your Geonaute pedometer: automatically (AUTO) or manually (MANU). This setting is applied in the 'Set' menu of your pedometer.

AUTO: Depending on your height, the pedometer will automatically calculate your stride length using a patented Oxylane algorithm.
MANU: For the most accurate results, you can enter your stride length manually.

To measure your stride length: Walk 10 metres, counting the number of steps you take, then use the following formula: 10 metres/number of strides = length of stride

What is the correct way of carrying my pedometer?

To obtain accurate walking data, it's important to wear your pedometer correctly. Wear the pedometer to the side of your belt or waistband. Wearing your pedometer in any other position will give incorrect readings.

Why do i need to set the time on my pedometer when it's not displayed?

Your pedometer automatically resets at midnight each day. That's why you need to set the time so that it knows when to reset.

How can i switch off my pedometer?

You don't need to switch off your pedometer. In fact, it goes into sleep mode after 5 minutes of inactivity. It "wakes up" automatically as soon as you start walking or when you press one of the buttons.

Accuracy

The readings on my pedometer seem incorrect or inaccurate. why is this?

Inaccurate readings on your pedometer may be caused by several factors:
- an incorrect stride length setting. If this is set to 'AUTO' mode, we recommend that you set it to 'MANU' mode.
- if you are using your pedometer for an activity other than normal or fast walking, e.g. running, hiking etc.

Can i use my pedometer for running or hiking

Your pedometer is designed for normal walking and brisk walking. The algorithms used to calculate calories and distance etc., are not designed to track running or elevation changes. These values will therefore be inaccurate.

Another question?

What is power walking?

Power walking is walking at a sustained pace which is extremely beneficial for your health. Your pedometer automatically determines your threshold for power walking, depending on your weight and height. The taller you are the faster you need to walk to reach this threshold. Geonaute pedometers calculate your active walking time.

How can i reset my pedometer to zero?

You can also reset all values on your pedometer by holding down the left and right buttons simultaneously for 3 seconds.

I maintain

- Cleaning the product :
In order to keep your glass clean, it is advisable to clean it with a damp cloth.

Troubleshooting

Here you will find the troubleshooting sheet for the product.
By following the steps in this sheet, you can check if there is a possible problem with your product. If necessary, you will find in the "I REPAIR" section the tutorials indicated for the repair. You can also come to the workshops of your DECATHLON store.

Link to download the product troubleshooting sheet (coming soon).

I repair my watch

The following repairs can be carried out on this product :

End of product life

If your product cannot be repaired, return it to a WEEE collection point or any DECATHLON store to optimize recycling.

Spare parts

Here is the spare parts list for the product :

(no spare parts currently available)

Workshop services

You want to entrust us with your product for repair. Here is the list of services offered by our workshops :

(no workshop services currently available)

Used resale

Coming soon

User guides

  • Need the product manual? Click download.

ONstep 100

Would you like to contact us? access the contact form