CORRECT.
This rack is REPAIRABLE.
We stock spares of all the parts and we guarantee that they'll be available for 10 years, from the date on which the last new product is sold in one of our stores or online.
Important: Metal structure uprights are not available from the after-sales service.
Only the lower guided load structure is available.

The assembled power rack 900 measures:
→ Depth: 166 cm
→ Width: 122 cm (without disc holder)
→ Total width :175 cm (with 2 disc holders)
→ Height:222 cm

Weight: 81 kg

The product will arrive in a box with dimensions:
→ Length: 120 cm
→ Width: 78 cm
→ Height: 26 cm
→ Weight: 85 kg
If you don't have a car to transport it, consider delivery!

The Power Rack 900 takes up just 6 square metres of floor space so that you can train at home with no hassle .
We recommend a safety perimeter of at least 1 m around the rack.
You'll need a ceiling height of 250 cm to do complete pull-ups (the bar is 219 cm high).

The Power Rack 900 is suitable for people from 1.60 m to 1.95 m weighing up to 130 kg.

This power rack includes:
→ An integrated, non-removable pulley.
→ 2 pull handles (1 triangle and 1 barbell).
→ 2 weight holders (max 100 kg each).
→ 2 barbell holders, to make your bodybuilding area easy to organise.
→ An adapter sleeve to adapt the weight holders and barbell holder to the diameter of your equipment: 28 mm or 50 mm.

We strongly recommend putting floor mats under the product to reduce the risk of damage and to make your workouts more comfortable. The type of floor you have (tile, concrete, wood), your own weight and the load you have on the rack will all affect this risk.
This will also allow you to compensate slightly for any unevenness in your floor.
Remember, it's essential that your floor is level so that you can install your rack and work out in complete safety.

NO.
The rack is not height or width adjustable.

NO.
The Power Rack 900 should not be set up or stored outdoors or in a damp and/or unheated place.
It is made from metal and doesn't have any rustproofing.
It can be installed in a garage or similar area, provided that it isn't damp.

NO.
The rack weighs 81 kg.
Our Power Rack 900 is not fitted with wheels.
It will be difficult to move once assembled.
It can be moved if needed, provided that there are several adults available to lift it.
Do not drag it along the ground.

YES
Decathlon offers the following warranty on this product under normal conditions of use:
↪ 5 years on the metal structure
↪ 2 years, parts and labour
from the date of purchase, as shown by the sales receipt.

Decathlon's obligation under this warranty is limited to repairing or, should that not be possible, replacing the product, at Decathlon's discretion.

This warranty does not apply in the event of:
        * Damage caused during transport.
        * Incorrect assembly.
        * Improper maintenance.
        * Improper or abnormal use.
        * Repairs carried out by personnel who have not been approved by DECATHLON.
        * Use other than private use.
↪ Find out more about the warranty's validity and exclusions in the user guide.
This sales warranty does not exclude the legal guarantee applicable in the country of purchase.

We recommend having at least two people to assemble your equipment safely.
Take the time to read the instructions or watch the video.

The rack takes 1 hour 15 minutes to assemble.
Reckon you can beat us?

First you need to assemble the metal structure and then the entire cable-pulling section.

Pay attention to the following points:
→ Do not fully tighten the structure until it is fully assembled, as this could cause problems with alignment and assembly.
→ Install the structure reinforcements correctly.
→ Pay close attention to the cable assembly stages.
Make sure you position the cable correctly and pass the lower cable through properly.
Incorrect routing can lead to premature wear of cables, pulleys and covers.

IMPORTANT: In the event of incorrect assembly, the guarantee may not apply.

If there is any noise, check the assembly and tightness of the framework.

Check the pulleys; they must run smoothly and not jam.
→ If they do, the cables will no longer slide but will rub against the pulleys.
→ This causes wear to the sheath, which will split open.
Check that your cables run smoothly; they should not rub anywhere.

You may also experience a slight rubbing noise from the disc holder on the guide, which can be reduced by very lightly lubricating the guide.
Note that in a small room, noises can be amplified, and it's difficult to fix!

You don't have to anchor the Power Rack 900 to the floor.

It's designed to be stable without being anchored to the floor.
Just make sure that you assemble it correctly and don't overload it.

However, you can do so using the holes in the frame.

Please check the box carefully.

If the part is missing, make sure you have proof of purchase and your product's serial number, then submit a support request by clicking on "REQUEST ASSISTANCE".*

Alternatively, please contact your local store.

*This service is only available in certain countries and for certain products.

User weight: 130 kg
Pull-up bar: 150 kg (130 kg body weight plus 20 kg of weights)
Pulley cable: 100 kg
Bar holders: 200 kg (100 kg per bar holder)

Bars that are compatible with our Power Rack 900 must be at least 2 m long with a diameter of 28 mm or 50 mm.

Not suitable for bars under 2m.

You can use plates with an inner diameter of 28 mm or 50 mm.
Compatible with cast iron, rubber and bumper plates.
For 50 mm plates, use our 28/50 mm adaptor.

This cage is sold separately. To work on your Rack 900 power rack, we recommend you add:
- 1 x 2-metre 28 mm bar (ref: 8289900)
or
- 1 x 2-metre 50 mm bar (ref: 8491834)
- Weights (28 mm (ref: 1042303, 50 mm ref: 8484128 for the 20 kg)

To accessorise it, you can add:
- A dips kit (ref: 8612857)
- A landmine (ref: 8766095, 50 mm or 28 mm with adapter included)
- The 900 bench (ref: 8766093)
- Floor tiles

The diameter is 15 mm (+/- 1 mm).

The holes for the bar rests are located every 3.5 cm and range from 30 to 180 cm.

You can safely do free weight, guided weight and bodyweight exercises with the Power Rack 900.
It is equipped with height-adjustable safety features.

Pulls with a wide, narrow or hammer grip.
Front and back bar squats with a stopper
Bench press, incline and decline with a stopper (with the Bench 900)
High cable pulls
Low cable rows

Not sure which exercise to start with or how to maintain proper form?
Take a look below at our tips website.
Our design team has created a training service to help you.

NO.
YOU MUST NOT HANG A PUNCHING BAG whether with a carabiner or any other system, on the Power Rack 900. Doing so could cause the rack to tip over.
This rack was not designed to hold a punching bag.
We recommend purchasing a suitable stand.

CORRECT.
You can attach resistance bands to the fixed parts to help you do your exercises.
You might also want to consider getting our weight-training pulley, which fits our racks.

This rack does not come with a bench.
It's up to you to choose the one you want.

All of the benches in the Domyos range are compatible with the Power Rack 900.
You might want to be able to adjust the incline, or to have leg rests, depending on what exercises you intend to do.

You could also take a look at our rental options!

If you have a problem while using your equipment, carefully read the user guide and our checklist above.

If the problem persists, please contact your local store or request assistance online below*.

*This service is only available in certain countries and for certain products.

If there is play in the frame of the rack, check the assembly and tighten the screws.
We recommend regularly checking the screws to extend the life of your product.
The rack might move on certain types of floors or if the floor is uneven.
If needed, you can attach the rack to the ground (holes present / screws not included)

You can also install floor mats.
This will also make training more comfortable and reduce noise levels.

If you notice any frictional noise or resistance to pulling, please check the following:
Step 6:
Check that the cable passes correctly through the covers, that it does not rub against them and that it passes properly between the pulleys.

If you notice any frictional noise or resistance to pulling, please check the following:
Steps 8 & 10
They are crucial to the rack assembly process.
It's important to check that your cable runs in the right place, especially at the base of the structure.
By assembling the bolts, you run the risk of positioning it incorrectly.
The cable then rubs against the bolts or covers.
The friction will damage the cable sheath, causing it to open and fray.
In the event of incorrect assembly, parts replacement is not covered by the warranty.

If you notice any frictional noise or resistance to pulling, please check the following:
Step 10:
Check that the cables pass correctly through the AA pulley.
They must be correctly positioned in the guide.
Also check that the cables pass correctly through the top and bottom pulley guides.

In the event of a cable tension problem, please repeat the 3 pull checks above.

Most problems are due to incorrect assembly.

Take the time during assembly to unwind the cable flat so that it does not twist.

When the cable is manufactured, there is a tolerance which means that the cable may be slightly longer or shorter.
This is normal.
There is a clip on the rack with 3 different positions to allow you to adjust it if necessary.

A grating noise can be caused by several things.
Be sure to check all the different points below:
SCREWS
* Check that all screws on your Power Rack are properly tightened.
PULLEYS
* Check that the pulleys have been properly assembled (spacers are in the right place) and that they have been properly tightened.
They must be able to turn smoothly, without resistance.
CABLING
* Check the routing of your cables.
You may have slipped the cable through the wrong place during the cable assembly step.
They can sometimes rub against plastic covers.
DISC HOLDER
*If you hear a grating noise from the guided load disc holder, you can/should lubricate the guide on your appliance.

Refer to our assembly video or the user guide to check that your equipment has been properly assembled.

The weights are hard to pull.

Weights may be hard to pull for one of several reasons.
Be sure to check all the different points below:
PULLEYS
→ Check that the pulleys have been properly assembled (spacers are in the right place) and that they have been properly tightened.
They should turn smoothly.
→ Check that the pulleys are not too tight.

CABLING
→ Check the routing of your cables.
You may have slipped the cable through the wrong place during the cable assembly step.
They can sometimes rub against plastic covers.
→ Refer to the user guide to check that the cables have been run through the right place.
→ Check that the cables have not come off the pulley groove.

PLEASE NOTE:
Using the power rack with a cable that does not move smoothly can cause the cables to wear out prematurely.
This can cause holes in the coating or cables to become frayed or broken.

This is not covered by the warranty.

Refer to our assembly video or the user guide to check that your equipment has been properly assembled.

Be sure to check all the different points below:

CABLING
During the cable assembly step:
→ The cable should be placed flat so that it is as straight as possible.
It was rolled up to be packed and needs to be unrolled to lie flat.
You may have slipped the cable through the wrong place.
They can sometimes rub against plastic covers.
→ Refer to the user guide to check that the cables have been run through the right place.
→ Check that the cables have not come off the pulley groove.
→ Take the cable assembly apart if necessary to check everything and put it back in place.

→ If the problem occurs after the product has been in use for some time, it may be because the cable is slightly slack.
Dismantle the assembly again to ensure that the cables lie flat. Check the condition of the cable and replace it if necessary.
Reassemble the cable, making sure it is taut (use one of the 3 positions at the bottom of the guided load support to do this)


CAUTION:
Using the power rack with a cable that does not move smoothly can cause the cables to wear out prematurely.
This can cause holes in the coating or cables to become frayed or broken.

Refer to our assembly video or the user guide to check that your equipment has been properly assembled.

YES.
We recommend changing the cables at least once a year.
They are available below or on our website.
It is also recommended that you check the pulleys.
They should turn without resistance and without play.
Replace them if necessary.
Cables and pulleys are considered to be wearing parts and are not covered by the warranty.

Length: 4300 mm ⌀5 mm / Tip:Ball and eye
Length: 2650 mm ⌀5 mm / Tip:Ball and eye

Available below or on our website.
In case of stock shortage, it is also possible to remake the cable on specialized sites taking into account the size as well as the maximum load of 100 kg.

YES:
The parts are compatible with the following model:
↪ RACK 900 with cable (ref: 8491828)
Only the colour varies.
Not compatible with other rack models.
Not compatible with other Decathlon models, except for those listed above.
Not compatible with other models from other brands.

Our parts have all been developed and optimised such that they only function with the models they have been designed for.

Your rack is repairable.

It comes with a warranty against defects*:
↪ 5 years on the metal structure **
↪ 2 years on the other parts **.

We keep spare parts available for 10 years (original or compatible) from the date on which the new product is purchased (proof of purchase required) from one of our stores or our website.

Out of warranty:
Find our available spare parts below or visit a store to order them.

Under warranty*:

If you have any problems, please contact the after-sales service team by clicking on "REQUEST ASSISTANCE" below and creating a support request (please have your receipt to hand).
Our support services are available via phone, email or video call***.

Alternatively, please contact your local store.

- Either to have the issue diagnosed and repaired (free if covered by the warranty, or paid-for if not).
- Or for a product exchange (if covered by warranty and the product can't be repaired).
- Or for a credit note or a refund (if covered by warranty and the product can't be repaired).

*Subject to acceptance of our services.
**More details available at the bottom of the page and in our user guide.
***This service is only available in certain countries and for certain products.

NO.

IMPORTANT
Our power rack 900 is for private , home use only.
It is not designed for professional / public / gym / fitness club use.

Our product is CE certified EN 20 957 - 1
Tested and approved by our users and our state-certified coaches.
Tested and approved by load tests in the laboratory.
This product was tested and approved by a panel of over 5 sports users via our Decathlon Co-Creation platform.
Our testers gave this rack an overall score of 4.5/5.
100% of testers recommend this product.
100% give it 4 or 5 out of 5.
80% said they would buy this product after the tests.
The launch of this new bodybuilding rack was approved by our sports customers!

Metal structure
100% - Steel
Foam - Outer fabric
100% - Thermoplastic polyethylene

Your rack 900's dimensions:
- Depth: 166 cm
- Width: 122 cm (without disc holder)
- Total width: 175 cm (with 2 disc holders)
- Height: 222 cm
- Weight: 81 kg

The product's uprights are 6 cm across.

Box:
- Length: 120 cm
- Width: 78 cm
- Height: 26 cm
- Weight: 85 kg

Maximum drawbar supported weight:
- 150 kg

Maximum bar holder weight:
- 200 kg total (100 kg per bar holder)