EL900 picture

EL900

Ref: 8528970

In stores: 2020 Our team has designed this cross trainer for all types of users, from beginner to expert level. It has been tested and approved for an average of 10 hours of use a week. SMOOTH PEDALLING: Breathtakingly smooth pedalling thanks to a 13kg flywheel. COACHING: 24 pre-set programmes and six functions on a back-lit console. MANOEUVRABILITY: Movement made easy thanks to front roller wheels. COMFORT: Range of motion of 51cm for optimal comfort and effective sessions. INCLINE: A motor-powered incline that ensures you make the most of your sessions.

ASSEMBLY VIDEO AND USER GUIDE

Need the product user guide? Click the link.

YOUR CONSOLE IS NOT WORKING OR IS DISPLAYING AN ERROR CODE?

The console does not turn on
WIRE CHECK EL900

1. Check that the power cord is plugged in and that the switch is in the "ON" position.

2. Check the cables and connections at the rear of the console.

3. Check the cables and connections at the bottom of the stem.

This involves checking that:

- the connectors are fully attached,

- the cables are not crushed/stripped or cut,

- the pins on the connectors are properly aligned.

If these checks do not solve the problem, please scroll down to request support.

You have an E1 error code

Your console needs to be replaced. 

If your cross trainer is still under warranty (2 years), please scroll down to request support.

 

If not, go to the "SPARE PARTS" section at the bottom of this page to buy a new console.

Consoles are also available on order from the workshop at your Decathlon store.

You have an E2 error code
WIRE CHECK EL900

You have an E2 error code:

1. Check the cables and connections at the rear of the console.

2. Check the cables and connections at the bottom of the stem.

This involves checking that:

- the connectors are fully attached,

- the cables are not crushed/stripped or cut,

- the pins on the connectors are properly aligned.

If you fail to find anything out of the ordinary, please scroll down to request support.

You have an E4 error code
INCLINE MOTOR WIRE CHECK EL900

Check the cables and connections to the incline motor.

This involves checking that:

- the connectors are fully attached,

- the cables are not crushed/stripped or cut,

- the pins on the connectors are properly aligned.

If you cannot see anything out of the ordinary, please scroll down to request support.

Switch console sound on/off

1. Turn on the console.

2. Press OK to enter the menu.

3. Use the + or - buttons to select SND and press OK.

4. Select ON to turn the sound on and OFF to turn it off.

5. Press QUIT to leave the menu and confirm your selection.

Change the console distance units (KM or MI)

1. Turn on the console.

2. Press OK to enter the menu.

3. Press the + or - buttons to select UNIT and press OK.

4. Select KM for kilometres per hour or MI for miles.

5. Press QUIT to leave the menu and confirm your selection.

List of programmes available on the console
EL900 programmes

This is a list of the 24 programmes available on the EL900 Domyos console.

THE BIKE MAKES A NOISE

You can hear a noise at the back of your cross trainer
Rolling arm check EL900

The rolling arms may have moved and are rubbing against the stride rails. 

Check the position of the arms (see photo below). 

You can hear a clanking noise when you're pedalling
Tightening Check EL900

You should check all the screws used to assemble the machine regularly. 

A loose screw can cause clanking when you pedal.

Check that the screws highlighted in red in the diagram below are tight.

YOUR CROSS TRAINER IS NOT STABLE

Have the levelling feet been adjusted properly?
Pads adjustment EL900

Check the six fastening points on the underside of the bike.

Adjust them by tightening/loosening the screws on the feet until the cross trainer is stable. 

Are the screws on your cross trainer tight?
Tightening check EL900

If certain parts of the bike are loose, it may be unstable when you pedal.

Tighten all the screws highlighted in the diagram below.

The pedals do not lock properly
Locking system EL900

Check step 12 of the instructions in order to check that the mechanical cable has been assembled correctly (see the diagram below).

PARTS DIAGRAM

Exploded view
Exploded view EL900

SERVICE REQUEST

If your problem isn't solved or you have discovered something abnormal during your checks, please make a service request and list the checks you have already done. Our team of technicians will get back to you as soon as possible. Feel free to include details of your request and attach photos or a video of your problem (under 20 MB). This will make diagnostics easier.

SERVICING YOUR PRODUCT

It takes care of you, so you should do the same for it. Regular maintenance is necessary to preserve the performance of your equipment and extend its service life.
MAINTENANCE INSTRUCTIONS 

- Wipe any sweat from the machine after each session.

- Clean with a moist cloth after every use.

- Make regular checks to ensure the machine is stable and consult the user guide to tighten up screws.

STORAGE TIPS

- Do not keep the machine outside.

- Do not keep in a place where temperatures and/or humidity levels vary significantly (conservatory, garage, etc)

USE RESTRICTIONS

- For home use only.

- Maximum user weight: 150kg.

REPAIRING YOUR PRODUCT

Want to repair your product yourself but not sure how? Here, you can find all the repair videos for your device. 
1. Change EL900 console
  • 1. Change EL900 console
    1. Change EL900 console
  • 2/ Change EL900 stem and console cable
    2/ Change EL900 stem and console cable
  • 3. Change EL900 control card
    3. Change EL900 control card
  • 4. Change EL900 incline motor
    4. Change EL900 incline motor
  • 5. Change EL900 heart rate sensors
    5. Change EL900 heart rate sensors
  • 6. Change EL900 rear chassis
    6. Change EL900 rear chassis
  • 7. Change EL900 water bottle holder and central casing
    7. Change EL900 water bottle holder and central casing
  • 8. Change EL900 mobile arms, pedal arms and rolling arms
    8. Change EL900 mobile arms, pedal arms and rolling arms
  • 9. Change EL900 switch
    9. Change EL900 switch
  • 10. Change EL900 incline motor cables and power cables
    10. Change EL900 incline motor cables and power cables
  • 11. Change EL900 crank arm
    11. Change EL900 crank arm
  • 12. Change EL900 belt and tensioner
    12. Change EL900 belt and tensioner
  • 13. Change EL900 speed sensor
    13. Change EL900 speed sensor
  • 14. Change EL900 motor
    14. Change EL900 motor
  • 15. Change EL900 pedal axle
    15. Change EL900 pedal axle
  • 16. Change EL900 flywheel
    16. Change EL900 flywheel
  • 17. Change EL900 console cable (lower)
    17. Change EL900 console cable (lower)
  • 18. Change EL900 stainless steel rail
    18. Change EL900 stainless steel rail
8528970

ORDERING AVAILABLE SPARE PARTS

Do you need spare parts for your machine?

Our commitments

Domyos guarantees this product under normal conditions of use for five years for the structure and two years for other parts and labour from the date of purchase shown on the receipt.

TOP OF PAGE