ES 180

8351242

Year of commercialization: 2016

I have a problem

I HAVE A PROBLEM WITH MY TRAMPOLINE

1. The tubes don't fit together

 

           => The assembly must be complete in order to allow the structure to settle

 

2. I cannot complete the assembly

 

           => By clicking \"NO\", you will be redirected to a help request

 

3. A tube belonging to the structure is bent

 

 

           => I would like to replace it
Every part may be ordered in your nearest Decathlon store

RECOMMENDATIONS FOR USE

           => Do not expose the trampoline when the weather conditions are unsuitable for its use (wind, snow), under penalty of the cancellation of the warranty

I THINK THAT THE CORDS ARE TOO SHORT

Assembly problem:

 

 

Help in assembling the net: 
1) Keep the zip of your net closed
 
2) Place your net on the jumping bed such that the zip is centred between two posts.
 
3) Take the cord on the opposite side at the rigid red end and make a knot at the triangle under the zip (centred between two posts)
 
4) Thread the cord through the hole of the net and then directly through the metal triangle at the spring. 

THE TUBES DON'T FIT TOGETHER

1. Assembly problem:

 

           => Check out the assembly video above

 

2. I cannot complete the assembly

 

           => By clicking \"NO\", you will be redirected to a help request

I CAN'T POSITION THE SCREWS

1. Assembly problem:

 

           => Check out the assembly video above

 

2. Don't hesitate to force the screws

 

           =>The screws are self-drilling screws, that must machine the metal slightly for a better fit

I FIND IT DIFFICULT TO CLOSE THE NET

Assembly problem:

 

 

Help in assembling the net: 
1) Keep the zip of your net closed
 
2) Place your net on the jumping bed such that the zip is centred between two posts.
 
3) Take the cord on the opposite side at the rigid red end and make a knot at the triangle under the zip (centred between two posts)
 
4) Thread the cord through the hole of the net and then directly through the metal triangle at the spring. 

Manual and software

You can not solve the problems or to find your answer, we invit you to contact us
TOP OF PAGE