RUN PRO

Ref : 8350242

Year of commercialization: 2016

Designed for running at home or in small clubs

Wide, sturdy treadmill for intensive use - 35 hours per week - at home or in small clubs.

PRODUCT BENEFITS : 

VERSATILITY : Max speed 22 km/h, motorised incline from 0 to 12%

USER COMFORT : Running deck: 51 x 150 cm

COACHING : 20 programmes, 5 functions: time, speed, distance, calories, bpm

I HAVE A PROBLEM

Your equipment is properly assemblied but you're having some difficulties during its use? Discover all of our solutions here.
THE CONSOLE WON'T SWITCH ON

The treadmill is not connected correctly

=> Check the connection of the mains socket, then make sure that the treadmill's main switch is set to "1"

=> Then check that the safety key is in position

=> Check and press the circuit-breaker if it has tripped

MY TREADMILL IS NOISY

The screws are loose

=> Tighten all the screws in the uprights

 

The running belt is not centred

=> Refer to chapter "Centering the running belt"

 

The running belt is not properly lubricated

=> Refer to chapter "Lubricating the running belt"

THE TREADMILL SPEED IS NOT CONSTANT

Check that the running belt is correctly tightened

=> Refer to chapter "Adjusting the tension of the running belt"

 

THE MOTOR OF MY TREADMILL SLOWS DOWN OR STOPS IRREGULARLY WHILE THE CONSOLE STAYS SWITCHED ON

Running belt tension is too high

           => Check the running belt tension so that the movement of the belt between the board and belt is about 3 centimetres at the middle of the board

           => If this is not the case, turn the two hex screws at the rear of the treadmill on each side of the roller and then loosen the running belt 

THE INCLINE IS NOT WORKING

The treadmill is calibrating

=> Switch the treadmill on and insert the safety key onto the console

=> The running platform gradually rises to its maximum level and then comes back down into its horizontal position. Wait for the whole operation to complete (the operation may take several minutes)

THE BELT INCLINE FACILITY DOES NOT WORK OR IS STUCK

The belt has not had time to calibrate the incline:

=> Turn off the treadmill, turn it back on and insert the safety key

=> Let the calibration cycle take its course. The belt will then go up to its maximum setting, then back down to zero. This may take several minutes      

How to make Process calibration in case of incline problem:

1. Push on stop & speed+ buttons in same time   

2.Insert safety key when still pushing on buttons

3.  Push on stop button 1 time and information on bottom picture will appear

4.  Push on inclin+ button and process calibration will start     

You can not solve the problems or to find your answer, we invit you to contact us

I MAINTAIN MY PRODUCT

Care and maintenance is important for the maintenance and longevity of your appliance. Please find further maintenance instructions here.
MAINTENANCE

Regular maintenance is necessary to maintain the performance of the machine and to extend the life of the product.

The following can help reduce treadmill noise:

 

        1. Tighten the screws and bolts once a month.

        2. Lubricate the running belt after 200 hours of use.

        3. Place a suitable floor mat (such as the Domyos Training Mat) under your treadmill.

 

 

Cleaning:

 

        1. Switch off and then unplug the treadmill.

        2. Apply a small amound of mild, multi-purpose cleaner, using a 100% cotton cloth. Do not spray directly onto the walking belt and do not use acid or ammonia-based cleaning products.

        3. Wipe the console and screens.

        4. Remove any dust and grime from the hand rails, uprights, foot rails, frame and motor hood. In addition, wipe the deck along the sides of the walking belt. Do not wipe under the walking belt.

ADJUSTING THE POSITION OF THE RUNNING BELT (CENTRING)

1. Locate the coloured indicators at the back of your treadmill. If they appear red, the band needs to be re-centred. This will enable you to protect the running belt and prevent the machine from stopping when you aren't expecting it to.

2. Turn your treadmill to 4 km/h (2.5 mph) and stand at the back of the machine.

3. If the belt has shifted towards the left: Turn the left adjustment screw through half a rotation, in a clockwise direction.

4. If the belt has shifted towards the right: Turn the right adjustment screw through half a rotation, in a clockwise direction.

5. Leave your treadmill running for the time it takes for the belt to move across (1 to 2 minutes) and repeat the operation if necessary.

Make sure, however, that you do not over-stretch the belt.

ADJUSTING THE TENSION IN THE RUNNING BELT

The running belt will be subjected to wear and tear and become less taut over time. Be sure to tighten it as soon as it starts to slip (a skidding sensation, with jerky changes of speed).

 

1&2. Turn the 2 adjustment screws through half a rotation, in a clockwise direction. Repeat this step if necessary but make sure you don't over-stretch the belt.

3. La bande est correctement tendue si vous pouvez soulever les bords de 2 à 3 cm de chaque côté.

LUBRICATING THE RUNNING BELT

It is imperative that you keep your treadmill well-lubricated, so as to limit the amount of friction between the running belt and the deck. No lubrication is necessary if traces of silicone are present on the inner side of the running belt or on the deck (and the surface is damp and slightly greasy).

If the belt and the deck are dry:

 

1. Switch off your treadmill and unplug it.

 

2. Lift up the sides of the running belt and coat the inner surface with silicone.*

 

3. Plug your treadmill in again.

 

4. Make the belt rotate at a speed of 4 km/h (2.5 mph), with no-one on it, for 10 to 20 seconds.

 

5. Your treadmill is ready for use!

 

* A single lubrication corresponds to a dose of between 5 and 10 ml of silicone.

Please note that if you use too much silicone, you could harm the proper functioning of your treadmill (risk of skidding).

When buying lubricants, consult your local DECATHLON store or go to www.domyos.com.

MANUALS

You need the instruction manual? Click here to download

OUR ENGAGEMENTS

DOMYOS guarantees this product under normal use conditions, 5 years for the structure, 2 for other parts and labour as from date of purchase, as shown on receipt.

TOP OF PAGE