VM 230

8289196

Year of commercialization: 2013

I have a problem

MY CONSOLE DOESN'T COME ON

  Your bike works with batteries Check that the batteries are properly positioned with the correct +/- polarity. If the problem persists, start again with new batteries  

                          

MY CONSOLE DISPLAYS 'ERR'

  1-Make sure the RO-ST switch on the rear of the console is in the central position  2-Press the \"RESET\" button to make the change

 

 

MY CONSOLE REMAINS ON ZERO

  1- At the rear of the console, make sure the connection has been properly made. 2-The junction of the frame and the structure has been properly made.

 

 

MY CONSOLE DOES NOT INDICATE THE RIGHT UNITS OF MEASUREMENT FOR THE DISTANCE

  1-Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles 2-Make sure the switch on the rear of the console is on \"VM\" for an exercise bike and \"VE\" for a cross trainer 3-Make sure the RO/ST switch on the rear of the console is in the central position  4-Press the \"RESET\" button to make the change

 

 

I CAN'T FIT THE PEDALS

 

The right pedal (R) and the left pedal (L) do not have the same screwing direction: 

                                 

                R= clockwise                                                                                                  L= anti-clockwise

 

THERE'S A CLICKING NOISE WITH EACH TURN OF THE PEDALS

Loosen by one turn and then really tighten the pedals

 

    

The right pedal (R) and the left pedal (L) do not have the same screwing direction

MY BIKE MAKES A NOISE

  1-Tighten all visible screws

2-Check the stabiliser runners  

 

 

I HAVE A PROBLEM WITH THE RESISTANCE

 

Unscrew the handlebar bracket tube and check that the cable connection has been made correctly 

Make sure the black shim on the lower part of the cable has been removed

 

 

PROBLEMS MONITORING HEART RATE

  1-Check the connection of the connector coming out of the handlebars 2-Moisten your hands slightly and place both hands on the sensors  

 

BROKEN OR MISSING PART

 

Look for the part number and click on 'NO’

 

 

Manual and software

You can not solve the problems or to find your answer, we invit you to contact us
TOP OF PAGE