VM130

Ref: 8289194

VM130

2013

Year of commercialization: 2013

Commissioning

I have a problem

There's a clicking noise with each turn of the pedals

Loosen by one turn and then really tighten the pedals

 

    

The right pedal (R) and the left pedal (L) do not have the same screwing direction

VM130
My console remains on zero

  1- At the rear of the console, make sure the connection has been properly made. 2-The junction of the frame and the structure has been properly made.  

 

 

VM130
My bike makes a noise

  1-Tighten all visible screws

2-Check the stabiliser runners  

 

 

VM130
My console doesn't come on

 

Your bike works with batteries

Check that the batteries are properly positioned with the correct +/- polarity. If the problem persists, start again with new batteries  

 

VM130
My console displays 'err'

-

VM130
My console does not indicate the right units of measurement for the distance

  Console configuration problem  =>Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles  =>Press the \"RESET\" button to make the change  

 

 

VM130
Broken or missing part

 

Look for the part number and click on 'NO’

 

 

VM130
I have a problem with the resistance

  Unscrew the handlebar bracket tube and check that the cable connection has been made correctly 

Make sure the black shim on the lower part of the cable has been removed

 

 

I can't fit the pedals

 

The right pedal (R) and the left pedal (L) do not have the same screwing direction: 

                                 

                R= clockwise                                                                                                  L= anti-clockwise

 

Manual and software

VM130

Would you like further help? click on "request assistance"