TILT 500

To minimise the risk of a tyre puncture, as well as to boost your bike's performance, inflate your tyre to between 3.5 and 4.5 bar. 

This bike has a hook on the front that is compatible with our Vioo Clip lights, available at all Decathlon stores.

There could be several reasons why your gears are not shifting smoothly or properly.

.1- Check that the derailleur hanger is not bent.

 

A bent hanger causes the derailleur to be out of alignment and therefore unable to function correctly. Stand behind your bike and examine the alignment of the derailleur. If the hanger is bent, please visit your local Decathlon workshop where they can assist you in straightening your derailleur hanger.

 

2- Check the position of the cable housing end caps (tips). Incorrectly positioned housing end caps can hinder the pulling action on the derailleur cable and consequently cause the shifting of the gears to be off.

At the rear derailleur, there are two places where you should check the position of the cable end caps.

- If either cable end cap is incorrectly positioned, put it back in its place.

 

3- The cable and/or housing may have seized up.

If, in particular, you have a hard time shifting gears to the smallest cogs (the highest speed, since gears are numbered from largest to smallest), or the derailleur does not move even after pressing the gear shifter, then the cable and/or housing have almost certainly seized up.

In this case, the cable and housing should be replaced. Your local Decathlon workshop can assist you with this, or you may choose to replace them yourself. If you regularly ride your folding bike in wet or muddy conditions, or if you regularly wash your Hoptown 320 bike with lots of water, then your cables and housing need to be replaced more frequently.

 

4- The derailleur may need to be adjusted.

For all of the reasons described above, your drivetrain may need to be adjusted.

To do this yourself, please follow the tutorial below. You may also want to visit your local Decathlon workshop, where our technicians can do this for you.

It could be that the steering headset is slightly loose. You can adjust this by following the instructions in the video below.

IMPORTANT: This adjustment requires special tools. If you are unsure of what tool to use or how to use it, please bring your bike to your local Decathlon workshop rather than attempt to perform the adjustment yourself. .

If there continues to be play in the steering after tightening, please bring your bike to your local Decathlon workshop to have it inspected by one of our technicians.

With use, sometimes a little play can appear in the stem's level (catch); this is not a safety hazard but can become annoying while steering the bike.

You can get rid of this play by following the instructions in the video below.

IMPORTANT: If you are unsure of how to perform this repair, please bring your bike to your local Decathlon workshop rather than attempt to repair it yourself.