TRIBAN RC520

To look after your bike properly, you need to have the right tools.

Step 1: Degrease it Step 2: Clean it Step 3: Lubricate it To find out more, click the link below:

In the article below, you'll find all the checks to be performed before any bike ride:

The tyre is the only part of your bike in contact with the floor, so it's important to minimise the risk of losing grip. This means keeping your tyre at the right pressure. Find our tips here: 

To set your saddle correctly, it's important to fasten your seat post properly. A loose seat clamp runs the risk of your saddle dropping during your ride. On the other hand, if you tighten it too much, you might crush your seat post and therefore damage your bike.    The best way of tightening your seat post is to use a torque wrench. We recommend tightening to 6 to 7 Nm.   Be careful not to exceed the maximum height shown on the seat post.

Before starting to fit your tyres, make sure your wheels are tubeless ready.  Follow our tutorial for mounting tubeless tyres.

Riding with worn tyres comes with risks: Loss of grip, Exposure to punctures. In this article, we're going to help you avoid punctures.

To know whether your pads are worn, you'll need to check the thickness of the brake pad lining. If it's less than 0.5 mm, you should change them to prevent your brakes becoming less effective.

Are your pedals broken? Do you want to swap your pedals for clipless ones? Follow our tips. Please note that the screw thread on the left pedal is the other way around. You therefore screw this pedal on anticlockwise. The right pedal has a normal thread.  Make sure to use the correct tool to remove your pedals as you will need to use some force to unscrew them.

If you get a puncture, follow our tutorial to change your inner tube.

Over time your handlebar tape will get worn, so it's important to change it now and then.

If your disc is noisy:  - Check that your wheel is properly centred. To do so, undo the screw then re-tighten it.  - Check that your calliper is set properly. - Check that your brake pads aren't worn. - Check the tension of your brake cables.  

If you notice that your brakes aren't very effective, there are several things you can do:  - Clean your disc using a brake degreaser. - Check that your brake pads aren't worn. - Check that the cable tension is OK.

Do you need to change your brake cable and/or housing? Follow our tutorial.

If your gears are skipping, you should check:  - Whether your drivetrain is worn. - The tension of the cables. - That the derailleur hanger isn't bent. After that, adjust the derailleur.

If your derailleur hanger is broken or bent, you need to change it.  

Below are our tips on easily changing your bike chain.

Worn drivetrain? Want to change the number of sprockets on your cassette? Watch our tutorial to find out how to change your cassette. Please note: the maximum cassette size for this bike is 11 - 34.

Are your chainrings worn? Do you want to change the number of teeth? It's easy to change your chainrings. To do so, simply use an Allen key to undo the screw that holds the chainrings on. Then install the new chainrings. On this bike, the minimum chainring size is 34t.

Do you need to change your derailleur cable and/or housing? Follow our tutorial.