Year of commercialization: 2013
Your bike works with batteries
Check that the batteries are properly positioned with the correct +/- polarity. If the problem persists, start again with new batteries
1-Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles
2-Make sure the switch on the rear of the console is on \"VM\" for an exercise bike and \"VE\" for a cross trainer
3-Make sure the RO/ST switch on the rear of the console is in the central position
4-Press the \"RESET\" button to make the change
1- At the rear of the console, make sure the connection has been properly made.
2-The junction of the frame and the structure has been properly made.
1-Make sure the RO-ST switch on the rear of the console is in the central position
2-Press the \"RESET\" button to make the change
1-Tighten all visible screws
2-Check the stabiliser runners
Unscrew the handlebar bracket tube and check that the cable connection has been made correctly
Make sure the black shim on the lower part of the cable has been removed
Loosen by one turn and then really tighten the pedal screws.
Look for the part number and click on 'NO’