Ref: 8289518
VE 730
2013
Year of commercialization: 2013
I have a problem
My console doesn't come on
1- Check that one of the metal connector strips is not twisted
2 -At the back of the console: check that the connection is properly made.
At the junction of the frame and structure: check that the connection is properly made.
My console does not indicate the right units of measurement for the distance
1-Make sure the switch on the rear of the console is on \"VM\" for an exercise bike and \"VE\" for a cross trainer
2-Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles
3-Press the \"RESET\" button to make the change
My bike makes a clicking noise on every pedal turn
The pedals are not tight enough
=>Loosen the pedals 1 tour and tighten them back up as hard as possible
Noise problem after assembling the product
There's a clicking noise with each turn of the pedals
Loosen by one turn and then really tighten the pedal screws.
I have a problem with the resistance
1- Check that one of the metal connector strips is not twisted
2 -At the back of the console: check that the connection has been properly made.
At the junction of the frame and the structure: check that the connection has been properly made.
Problems monitoring heart rate
The heart rate indicator is not flashing or is flashing irregularly
1-Check the position of the battery or replace it with a new battery
2-Moisten the belt slightly on the part that is in contact with your skin
3-Make sure you place the belt against your skin and not over your T-shirt
Broken or missing part
Look for the part number and click on 'NO’
Manual and software
