VM 530

  1- Check that one of the metal connector strips is not twisted   2 -At the back of the console: check that the connection is properly made.      At the junction of the frame and structure: check that the connection is properly made.  

 

 

- Check that one of the metal connector strips is not twisted

 

 

 

  1-Make sure the switch on the rear of the console is on \"VM\" for an exercise bike and \"VE\" for a cross trainer 2-Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles 3-Press the \"RESET\" button to make the change  

 

  1- Check that one of the metal connector strips is not twisted   2 -At the back of the console: check that the connection has been properly made.      At the junction of the frame and the structure: check that the connection has been properly made.  

 

  The heart rate indicator is not flashing or is flashing irregularly 1-Check the position of the battery or replace it with a new battery 2-Moisten the belt slightly on the part that is in contact with your skin 3-Make sure you place the belt against your skin and not over your T-shirt  

 

  1-Tighten all visible screws 2-Check the stabiliser runners   

 

  Loosen by one turn and then really tighten the pedals

                              The right pedal (R) and the left pedal (L) do not have the same screwing direction

 

 

Look for the part number and click on 'NO’