I have a problemMY CONSOLE DOESN'T COME ON1- Make sure the back of the console is properly connected. 2- Make sure the handlebar stem and base are properly connected. 3- Check that the adaptor is correctly connected to the bike and plugged in to the mains and make sure that the plug works. MY CONSOLE DOES NOT INDICATE THE RIGHT UNITS OF MEASUREMENT FOR THE DISTANCEYour console is on standby 1 - Press the \"Start\" button until you see KM or MI on the screen. 2 - Press the right arrow to change the unit of measurement. KM = Kilometres MI = Miles. 3 - Press the \"Start\" button to confirm your choice. PLUGGING IN YOUR BIKE-I CAN'T FIT THE PEDALS The right pedal (R) and the left pedal (L) do not screw on in the same direction : THERE'S A CLICKING NOISE WITH EACH TURN OF THE PEDALSUnscrew the pedals by one turn, then screw them back on very tightly MY BIKE MAKES A NOISETighten all visible screws MISSING OR BROKEN PARTLook for the part number and click on 'NO’ MAINTENANCE1. Unplug the adaptor after each use. 2. Clean with a soft, slightly damp cloth after each use. 3. Regularly check against the instructions that your bike is stable and that the screws are tight. 4. If you aren't going to use your bike for a while:- remove the batteries- don't leave your bike in direct sunlight or anywhere damp