REF: 8737734, 8737733, 8854030, 8801190, 8801192
2024
All our tips on using, maintaining, repairing your W200 watch and changing its strap, electronic module or dial.
Long press on the "play/pause" button to turn the watch on.
Choose 12h or 24h with the "+" or "-" buttons and press on the "mode" button to confirm.
Set the hours, minutes and seconds with the "+" ("play/pause") or "-" ("lap/reset") buttons. Confirm with the "mode" button.
Enter the day's date with the "+" or "-" buttons and press on the "mode" button to confirm.
Choose the "DD/MM" or "MM/DD" date format with the "+" or "-" buttons and press on the "mode" button to confirm
Enter the month with the "+" or "-" buttons and press on "mode" to confirm.
Enter the year with the "+" or "-" buttons and and confirm with the "mode" button.
Press on the "mode" button several times to get to "time".
Long press on the "settings" button.
Set the hours, minutes, seconds, day, month and year with the "+" ("play/pause") or "-" ("lap/reset") buttons.
Confirm each setting with the "mode" button.
Press on the "mode" button several times to get to "chrono".
Start the stopwatch by pressing on "play/pause".
Press again on "play/pause" stop the stopwatch.
Restart the stopwatch by pressing on "play/pause"
Press on the "LAP" button to memorise an intermediate time (time visible at the top of the screen). Press again on "LAP" to save the next time.
To reset the stopwatch, pause it by pressing on "play/pause", then long press on "lap/reset" for 3 seconds.
If you go back to the time display, the stopwatch will continue to run in the background by displaying the stopwatch icon below the time.
Press on the "mode" button several times to get to "timer".
Long press on the "mode" button.
Set the hours and minutes with the "+" and "-" buttons ("play/pause" and "laps").
Once the time has been set, set the repetitions (choose repetition or not) by pressing on the "+" and "-" buttons ("play/pause" and "laps"), then confirm.
Start the timer by pressing on the "play" button.
To reset the timer, long press on the "reset" button.
Restart the timer using the "mode" button and go back to the time to check for the presence of the timer icon.
Press on the "mode" buttons several times until you get to "alarm".
Long press on the "settings" buttons.
Select "ON" mode using the "mode" button and confirm with the "mode" button.
Set the hours and minutes with the "+" and "-" buttons ("play/pause" and "laps"). Confirm with the "mode" button.
Go back to the time to check that the alarm has been activated. The "alarm" icon is visible on the screen.
To activate or deactivate the alarm, go back to the "alarm" menu with the "mode" button and press on "play/pause" to activate or deactivate the alarm.
Replace the parts in a few minutes using a precision Phillips screwdriver and a precision flat head screwdriver.
When the arrows on the watch are ligned up, this indicates that the product has been reassembled correctly.
Once the parts have been replaced, the watch will still be watertight.
1. Remove the strap:
Pull the metal pin downwards with your finger or a flat head screwdriver and pull gently on the top of the strap to unhook it, then pull on the bottom of the strap. Do the same thing with the other side of the strap. Remove the module.
2. Replace the strap:
Place the module in the strap the right way round (line up the arrows). Put the metal pin at the bottom Place the bottom of the strap in the casing with your index finger. Pull the metal pin dow to hook the strap and place the top of the strap on the casing. Let go of the metal pin. Check that the strap is in place by pulling on it. Do the same thing with the other side of the strap.
1. Remove the electronic module:
Open the housing and remove the electronic module. Unscrew the four screws with a precision Phillips screwdriver. Unclip the bottom of the housing with a small precision flat head screwdriver.
Turn over the casing to take out the housing, without forcing it.
2. Replace the electronic module:
Put the electronic module in the housing with the arrows lined up, without forcing it. Position the bottom of the housing on the top of the housing. Screw in diagonally without tightening completely. Press on the bottom of the housing to compress the seal and ensure it is watertight. Finish screwing it in.
Place a little flat head screwdriver in the groove and "flip" out the battery to remove it.
Slide the new battery under the notch and press it in.
Check that the watch restarts in "setting" mode.
KALENJI W200 M BLACK NEW