spare parts
Head to the Decathlon site to find all of the spare parts for your product!

REF: 8796188, 8796189, 8796190
2023
In the technical data sheet, you'll find all the information you need for installation, maintenance and spare parts, so you can enjoy your product for years to come.
How to assemble and adjust your foil
- We recommend that you unscrew all your equipment after each session, even if you don't dismantle it completely. If possible, dismantle and rinse your foil completely after each session. It may seem tedious, but it helps to keep your equipment in good condition and to detect any damage it may have sustained.
- Grease the inserts and screws. Before you even get out on the water and assemble your foil, remember to grease the inserts and screws. The screws are usually made of stainless steel, while the rest of the foil is made of aluminium. When mixed with salt water, this can cause galvanic corrosion which can make these parts difficult to separate.
- To prevent oxidation, Teflon grease is used to fill the spaces where oxidation can occur. Sometimes a brush is supplied, but an ordinary toothbrush works just as well. Apply every 2 or 3 sessions if you go out every day, or after each session if you go out only occasionally.
- If you notice slight scratches on your wings, don't worry, this is normal and can happen over time and during transport. To repair this, clean your wing and dry it thoroughly. Use sheets of water-based sandpaper, such as those used in shaping or bodywork (600 to 1000 grit). Wet the paper and rub in circular movements to remove scratches. To finish, you can polish with a special polishing paste and wipe with a microfibre cloth. That's it, your wing will be as good as new.
How to change the helicoil

Head to the Decathlon site to find all of the spare parts for your product!