DOMYOS WOODBIKE

The bike is made of untreated wood. After assembling the frame, you can apply oil to the wood.

Once the bike is laid down, it's advisable to move the drivetrain block upwards slightly.
This allows you to line up the holes on the wooden structure and the screw threads on the drivetrain block, so you can put the screws in place more easily.

Wood is a material that moves. We recommend that you firmly tighten all assembly screws once you've used the bike a few times.

The bike's level of resistance can be modified using the knob under the saddle.

Turn the knob a few times to move from minimum to maximum level of resistance.

Check that the visible screws are tight enough.

- 1/ stem / handlebar connection

- 2/ front foot / stem / main beam connection.

- 3/ under the bike, main beam / saddle beam connection.

- 4/  back foot / main beam connection.

- 5/ saddle knob

- 6/ saddle clamp.

If the screws are not tight enough, parts could move and make noise.

You also may want to check the stability of your bike.

It is possible that the screws on the pedal and crank are not properly threaded or placed.

To solve the problem, loosen the pedals by two turns, then re-tighten them very hard.

1. Tighten all visible screws and control knobs:

- 1/ stem / handlebar connection

- 2/ front foot / stem / main beam connection.

- 3/ under the bike, main beam / saddle beam connection.

- 4/  back foot / main beam connection.

- 5/ saddle knob

- 6/ saddle clamp.

Turn the control foot located under the bike.

1. Wipe any perspiration off of your bike after each workout.

2. Regularly check the stability of your bike as well as the tightness of the screws in line with the user guide.

The bike is made of untreated wood. After assembling the frame, you can apply oil to the wood.

Do not leave in a damp place or outdoors.

For home use only. 

Maximum user weight: 110 kg.