ONmove 220

Screen configuration is accessible from the Settings > Screens menu. Use it to select the information to be displayed while exercising. Each screen can display one or two values.

To select a value:
- Select the line you wish to modify by pressing on "Play/Pause"
- Choose the values you want with the bottom left and right buttons
- Confirm with the "Play/Pause" button

To display one value only on the screen, simply disable the second by selecting "OFF". Display adapts to the number of values chosen. The value is displayed larger when only one has been selected.

Check out the first steps with your product using our video

Your ONmove 200 is compatible with our online exercise measuring and analysing service. You can find out about all the functions you get with this service on this video

Your sessions are listed in chronological order on www.decathloncoach.com. The date of the session depends on the date your watch is set to. Check that your watch has been set to the right time. If this is not the case, your session will be listed according to the date on your watch. You will have to search in your myGeonaute account log and modify the date manually by clicking on the "pencil" icon.

1. Make sure the cable is properly connected to your watch and computer.2. Make sure you use a micro-USB cable capable of data transfer. Some micro-USB cables can only be used for charging. These can be identified by a lightning bolt icon on the cable.3. Make sure you have the latest version of ONconnectHowever, if you're still experiencing problems, please contact our Support team via the "Contact" page at the bottom of this website.

To transfer your sessions to your smartphone:1. Make sure that your phone is compatible2. Make sure that you have installed the DECATHLON CONNECT application (available on Apple Store and Google Play)3. Activate Bluetooth on your phone4. Launch the DECATHLON CONNECT application5. Hold down the button at the bottom left of your watch for 2 seconds in order to open the "Connect" mode6. On DECATHLON CONNECT, "select your product" if you are using the application for the first time.7. Your phone is connected and your sessions should appear on your phone

Thank you for following this procedure:

With ONconnect application, it is possible to save the activities as files in GPX or TCX format.

- GPX format for activities with a GPS track.

- TCX format for activities without a GPS track.

How to do ?

1- Connect your product to the computer using the USB cable. The product then appears as a mass storage device (such as a USB key).

2- Start the ONconnect application if it does not open automatically.

3- Select the activity (s) to be saved Fig. I (1).

4- Modify the sport if necessary Fig. I (2).

3- Click on the "save my activities" button. Fig. I (3).

4- Select a location on your computer and confirm. The activity (s) are saved as a GPX or TCX file.

5- It is possible to erase the activity (s) of your product Fig. II.

6- at end, a screen offers to import the activity (s) on decathloncoach.com. Fig. III.

Note: It is also possible to import these activities into the application of your choice provided that it supports GPX or TCX files.

For more details, consult the online support of the application concerned.

1. Make sure the cable is properly connected to your watch and computer.2. Make sure you use a micro-USB cable capable of data transfer. Some micro-USB cables can only be used for charging. These can be identified by a lightning bolt icon on the cable.3. Make sure you have the latest version of ONconnectHowever, if you're still experiencing problems, please contact our Support team via the "Contact" page at the bottom of this website.

Satellite signal reception quality is considerably impacted by the environment and your movement. To facilitate reception, we recommend the following during signal detection: 1. Positioning yourself in a clearing away from buildings and trees. 2. Placing the watch on the ground.

FastFix technology helps your watch pick up the satellite signal more quickly. You can start exercising straight away.

In concrete terms, FastFix picks up satellite ephemerides. These ephemerides are valid for 7 days. So, to enjoy FastFix technology all the time, you must update the FastFix on your product once a week by synchronising your ONmove 200 with ONconnect. Otherwise, it will take longer to pick up the satellite signal.To download ONconnect, go to www.start.geonaute.com

To find out whether FastFix is up to date on your watch, go to the Settings > About > FastFix menu. This shows whether FastFix is up to date or not.

If you do not want to be limited by this 7-day period, you can also update the FastFix manually as follows:1. Connect your ONmove 200 to your computer. Access My Computer3. Delete the ONCONNECT.JSON file4. Start ONconnect to view the FastFix update information 5. Unplug your device so that the FastFix update can be completed

When the battery of your ONmove 220 is fully charged you may enjoy 7 hours' GPS use. It may wear down more quickly in the following cases:- Frequent use of back-lighting- When the sound is activated and you use options with many warning sounds- When using a cardio belt.

You can charge your GPS ONmove 220 watch by connecting it to your computer, a nomad charger or 5V 1A mains adapter.

You can use your GPS ONmove 220 watch while charging it on a nomad charger or mains adapter. You cannot use the watch when it is connected to your computer.

You can get a charger cable or strap at the workshop of your local store.

If your watch doesn't start, you will have to reset it. There are 2 ways to reset:
1. Resetting the watch: Accessible from the Settings> About > Reset menu, this resets all your custom configurations and settings and deletes all sessions in the memory
2. Rebooting the watch: If your watch freezes on a screen or no longer responds, you can start it again by pressing the ON/OFF button (top right on the watch) for 20 seconds

To make sure it detects your cardio belt properly, we advise you to check the following points:
1. Make sure your cardio belt uses the Bluetooth Smart protocol. Belts using the ANT+ protocol are not compatible with this product.
2. Activate mode in the Settings > HR Sensor > HR Sensor menu: ON
3. Pair your cardio belt up to your watch. By pairing them up, you can connect your belt to your watch. This is only necessary when using a belt for the first time or after resetting your watch.
4. Moisten the sensors on the elastic strap & position the belt properly below your pecs.

To start a session without using the GPS, you must:
1. Press on the "Play/Pause" button when searching for the GPS
2 signal. Select "No" when asked "Use GPS?". You can start exercising without speed and distance values.