SNOWBOARD BOOTS - HABU system

REF: 8398112, 8602158, 8398107, 8590374, 8504044

SNOWBOARD BOOTS - HABU SYSTEM

2022

HAVE YOU BROKEN YOUR FASTENING SYSTEM?
DON’T THROW AWAY YOUR BOOTS!

Discover the solution to repair the tightening system of your snowboard boots, and our advice to thermoform your boots.

Women’s models with this feature

Snowboard boots (1)
ALLROARD BOOTS 500

Allroard boots 500

8731667

ENDZONE BOOTS 500

Endzone boots 500

8733778

The models concerned by this item:

range of decathlon snowboard boots
Snowboard boots - HABU SYSTEM

The HABU system

Are your boots equipped with the HABU system?
If you have the slightest problem with the tightening system of your boots, contact the after-sales service, provided on the site habufit.com/support

Our boots are equipped with H4 adjusters and SS2 laces, both tested and approved by Boa Technology Inc. for many years.
Like Boa, Habu guarantees the adjusters and cables for life, provided your boots are still usable. Request your repair kit, receive it within 3 working days, and repair your boots yourself.

Snowboard boots – HABU SYSTEM: instructions, repairs

The ATOP system

Are your boots equipped with the ATOP system?
If there is a problem with your adjuster wheel or laces, contact our service, available in the workshop of your nearest Decathlon store.You have the option of getting your boots repaired on site, or ordering a kit via the workshop to carry out the repair yourself.

*Prices quoted for services include labour only (excluding parts) and may vary depending on the store. In the event that the store does not provide local services, the products are sent to the nearest Regional Workshop, which may result in an increase in the price displayed online. Please contact your Decathlon store for a quote.

THERMOFORM YOUR LINERS

YOURSELF

Foot comfort when out riding is of paramount importance. You could even say that it directly influences the success of your day!
So here’s some good news - thermoforming is emerging as an essential solution for skiers and snowboarders. This technique offers the possibility of adapting the liners of your boots to the shape of your feet, creating a personalised fit that results in increased comfort and unrivalled precision out on the slopes. Thermoforming is possible at home... We'll explain how to do it!

A liner that’s too flat?

Have the liners in your snowboard boots become compressed, and your feet are no longer properly supported? But don't worry! With a simple volume reducer to place under the insole, you can regain optimal support, just like on the first day, while preserving the comfort of your boots.

sole-liner-snowboard-boots
sole-liner-snowboard-boots

Snowboard boot volume reducer - 3mm.

When your foam liners become thin and squashed, this 3mm reducer helps adjust the volume inside your ski boots, giving them a new lease of life.

See the soles
Looking after and repairing your helmet

Ski helmet : notice, repairing

Have you just bought a ski or snowboard helmet and would like advice on how to maintain, repair and/or store it properly? Get all the information you need to help you keep your helmet for longer.

Looking after and repairing your snowboard

looking after and repairing your snowboard

Have you just bought a snowboard and want some advice on looking after, repairing it and/or storing it properly? Find all the information you need to help keep your snowboard in good condition long-term.

SNOWBOARD BOOTS

Other problems?

A cut lace? A broken hook or rivet? A lost part of the boot?

Send us an email to: [email protected]

We’ll take the time to identify the problem and get back to you with a solution. To save time, tell us your problem in the email with:
- A photo
- Proof of purchase
- First and last name
- Postal address
- Telephone number

Is your sole coming off?

Is your sole coming off in places? Act quickly before it’s too late.
A boot is, above all, a piece of footwear. So take it to your shoemaker - these craftsmen can often perform miracles!

Otherwise, you can try your luck with the shoegoo.

damaged snowboard boots

Abrasion, cuts or scratches

Have your bindings or the edges of your board damaged your boots?
Don't worry!

Our skater friends have been using shoegoo for a long time, a kind of glue used to stick and seal cuts or scratches on boots. In this way, your boots will be repaired while keeping track of their adventures.

Visit your local skateshop or go online to extend the life of your boots, with shoegoo!

Loss of stiffness and spring?

The solution: FLEX UP.

The flex up is a small item to place in the tongue of your liners to stiffen your snowboard boots.

It can be used in the following 3 cases:
- Your boots have become soft with use, so give them new life with Flex up.
- You want to move to the next level without buying a stiffer pair of boots, so increase the rigidity with Flex up instead!
- You are freestyle, adjust your flex: on the rails of rails, do not put in the Flex Up, but for better support when landing on big tables, insert it into your tongue.

flex up to stiffen snowboard boots
sole-liner-snowboard-boots

Snowboard boot stiffener - Flex Up

It provides about 2 flex points: with Flex Up, a medium 5/10 rigidity boot increases to 7/10.

View the product
flex up

Boots equipped with the Flex up pouch

Since 2022, all Decathlon boot models have been equipped with a pocket in the tongue to accommodate flex up, except for older models still available online on our website. Check the information on the product sheet before purchasing.

Men’s models with this feature

Snowboard boots (1)
Men’s endzone boots

Endzone boots

8733779

ALLROAD BOOTS 500

Allroad boots 500

8734563

ALLROAD BOOTS 900

Allroad boots 900

8643401

Snowboard boots - Habu system

Habu’s lifetime warranty

The dual FocusTM disc configuration of the Habu® Fit System gives riders maximum control to adjust their boots in two distinct zones; which helps maintain the heel and increases the responsiveness of the board on demanding terrain.

Powered by BOA Technology Inc, the habu® Fit System discs and laces have undergone thousands of hours of rigorous laboratory and field testing to be approved and are guaranteed for the life of the shoe on which they are integrated.
If you encounter the slightest problem with the tightening system of your boots, contact the after-sales service provided on the habufit support website

Thermoform your shoes

By yourself

THERMOFORMING IS ONLY POSSIBLE IN ELECTRIC BUILT-IN OVENS MEASURING 56 x 60 x 56 cm WITH A FAN MODE.
DO NOT ATTEMPT IN A GAS OVEN OR A SMALL TABLE TOP OVEN WITH VISIBLE HEATING ELEMENTS.

1. Heat your oven to 80°C in convection mode
2. Remove the inner bases of the liners, place the liners on the oven plate with some greaseproof baking paper
3. Wait 15 mins
4. Put the socks back on, put them on with a pair of ski-snowboard socks and tighten them (not too hard)
5. Put the boots on and tighten fully5. Wait for 15 minutes in static

This can be repeated if necessary.

Snowboard boots - thermoforming